Enjoy the Convenience
Zero Installation Purifier works just like your coffee maker. No need for messy hoses or diverter valves. Just fill the bottom pitcher with water from your kitchen faucet, push the button and walk away.
In about 15 minutes the top container will be filled with 0.5 gallons of purified water and the unit will turn itself off.
As water is loaded and dispensed from the front of the unit, you can place it even in the tightest spaces imaginable. No additional top or side clearance is required.
Zero Installation Purifier is ready right out of the box, comes assembled with all the filters preinstalled.
It’s very simple to use:
- Unbox the unit and place it on your countertop. A compact square design will fit nicely among your other kitchen appliances.
- Plug in the AC adapter into the electrical outlet and flush the filters by running 2 filtering cycles.
- Enjoy fresh, pure and delicious water.
- Top and bottom containers can be easily removed and cleaned with dish detergent.
ZIP reverse osmosis offers excellent filtration against commonly found contaminants in water. The 4-stage filtration system is able to achieve up to 99% removal of contaminants in your drinking water.
This arrangement ensures that even the tiniest toxic micro-organism does not escape all the levels of the filtration system. Thus, you can rest assured the resulting drinking water coming out from the system is only of the highest quality.
Unlike other reverse osmosis systems that tend to waste a lot of water in the process, the ZIP countertop system has a recovery rate of 50% which is the highest among all other RO filters. In simple words, for every litre of tap water, you’ll get half a litre of great-tasting filtered water.
Multi-Stage Filtration Stages
ZIP reverse osmosis is a 4 stage system and all the filters work together to eliminate impurities such as chlorine, fluoride, heavy metals, organic matter, and other impurities.
Stage 1: The sediment filter removes silt, sand, sediment, rust, and anything which is larger than 5 micron in size.
Stage 2: Activated carbon block filter provides a reduction of chlorine and organic materials that cause bad taste and odours.
Stage 3: The carbon block filter uses tiny filtration pores to remove fine impurities and particles greater than 1 micron in size.
Stage 4: The RO membrane purifies water by blocking virtually all the harmful contaminants. It’s the heart of the reverse osmosis system.
Stage 5: The last filter enriches the water with calcium and magnesium and increases the pH to an alkaline level.
This sleek and stylish reverse osmosis unit demands very little maintenance and the filters can be replaced easily without any effort. The ZIP RO system will notify you to replace the filters by blinking red light after every 12 months.
Replacing filters or membrane, the process itself isn’t complicated at all. You just need a screwdriver to remove the back panel. Then you can replace the sediment and the carbon pre-filter with a simple twist. RO membrane + carbon post-filter use quick-connect fittings which are DIY-friendly, too. This shouldn’t take longer than 5 minutes.
The replacement filters for ZIP RO can be easily purchased online.
- 6L Capacity: 4L of tap water + 2L of filtered water
- 800 ppm, 15ºF, 20ºC
- 100% BPA free plastic
- Modern and Sleek Design
- Upgraded interface, one-touch for all functions
- Salinity 800ppm